Dimensions 
Depth 31.70 mm | 1.248 in
Height 19.30 mm | 0.760 in
Width 17.00 mm | 0.669 in

Construction Materials 
Housing High-Impact, Flame-Retardant Plastic, UL 94V-0
Spring Wire Phosphor Bronze Alloy Plated W/ 50 MIcro-Inch of Gold
IDC Phosphor Bronze Alloy W/ 100 Mirco-Inch 100% Sn Alloy

General Specifications 
Cable Type U/UTP (unshielded)

Environmental Specifications
Flammability Rating UL 94 V-0
Meets FCC Part 68
Safety Standard cUL | UL
Relative Humidity Up to 95%, non-condensing
Operating Temperature -40ºC to + 80ºC ( -40 °F to + 176 °F) 

Mechanical Characteristics 
Insertion / Extraction Life 750 Cycles Minimum
IDC Wire Gauge 22 ~ 24 AWG
Rear Termination Type IDC
Wiring T568A | T568B

Electrical Characteristics 
ANSI/TIA-568-C.2 Category 6 Channel & Permanent Link Requirements
ISO/IEC 11801 Class E Category 6 Performance Standards
Electrical Insulation Resistance 500MΩ Min. @ 100V D.C.
Dielectric Withstanding Voltage 1000V D.C. or A.C. Peak
Contact to Contact @ 60Hz for 1 Minute. 

Performance Line